•   Applications
•   About HEATMOR™
•   Features
•   Residential
•   Commercial
•   EPA Units
•   Dual Fuel
•   FAQs
•   Official Website

EPA Units

In response to the new EPA regulation, Heatmor introduces the X-Series Model 200X and 350X into their current line of stainless steel outdoor furnaces with an efficiency rating of 58% and higher.

Model	200 X	350 X
Limited Warranty	LIFETIME	LIFETIME
Overall Width	50"	50"
Overall Height	82.5"	82.5"
Overall Length	95"	95"
Total Weight (lbs, without water)	1,835	1,980
Water Capacity (US Gallons)	310	270
Forced Draft (CFM)	150	2 x 150
Chimney Diameter	8" or 10" Insulated	8" or 10" Insulated
Maximum Wood Length (inches)	19	30
Insulated Heating Area (sq.ft.)*1 Loading/day 2 Loading/day	2500 5000	4000 8000
Heating Area* (sq.ft.)	5,000	8,000
Firebox Dimensions	20" D x 18" W	20" D x 18" W
Volume of Firebox (cu.ft.)	14	21
Firebox Door Size	20" W x 18" H	20" W x 18" H
Flue Transfer Area (sq.ft.)	39.75	39.75
BTU's** (maximum)	200,000	280,000
Water Jacket Steel	409 Stainless, 10 Gauge	409 Stainless, 10 Gauge
Firebox Steel	409 Stainless, 10 Gauge	409 Stainless, 10 Gauge
Base Steel	409 Stainless, 14 Gauge	409 Stainless, 14 Gauge
Base of Unit to Bottom of Loading Door	24"	24"
Warranty, Workmanship	Limited Lifetime	Limited Lifetime
Warranty, Corrosion	Limited Lifetime	Limited Lifetime
Approvals Test Standards	UL2523-2009 CSA-B366.1-11	UL2523-2009 CSA-B366.1-11
Hook-ups	Back	Back
Type of Fuel	Wood	Wood
Electrical Supply	115 V, 60 Hz, 1 Phase	115 V, 60 Hz, 1 Phase

*This is an estimate only. Actual loadings per day may vary depending on structures heated, type of wood used, and climate.
**This value should only be used as an indication of the furnace's heat recovery ability. Sustained outputs at this rate will increase the loadings per day. Some types of wood may prevent the furnace from reaching this maximum output.

PAD SPECIFICATIONS

OPTIONS